50 years of experience and knowledge


Metal NXT Series 00 Compounding


Our NXT Compounding Extraction Hood provides the highest level of operator and environment protection from harmful contaminates, while weighting non-sterile powders and compounds. Quality materials, components and workmanship can be found in this fully loaded NXT series hood.


  • Operator Protection
    The airflow is directed away from the operator, into the hood to be filtered. Both the NXT-300 and 400 models have been successfully ASHRAE 110 tested with excellent results.
  • Particulate Filtration
    The Compounding Extraction Hood filters the air through a HEPA Filter rated at 99.99% with the filter located at the entry point of the cabinet, allowing all mechanical and electrical components to be protected.
  • Independent Operation
    Internal fan(s) direct the air without the need for being ducted to the building system. The filtered air is vented back into the room, saving otherwise wasted energy.
  • Sturdy Construction
    Constructed from cold-rolled steel with anti-bacterial powered coating, Interior 304 stainless steel with coved corners, two layers of laminated, toughened, anti-UV glass, and an electroplated work surface.


  • Cold-rolled steel exterior shell with durable anti-bacterial powder coat finish.
  • Stainless steel interior lining with electro-polished finish.
  • Microprocessor with LCD display to control lights, fans.
  • LED task lighting & UV germicidal light.
  • Motorized vertical sliding face shield c/w integrated shut-off for fans and UV light when in the closed position.
  • UV resistant safety glass sash and side windows.
  • HEPA filtered exhaust, filter rated 99.99% efficient at 0.3µ.
  • Low flow alarm to monitor HEPA loading at the exhaust.
  • Quick change disposable pre-filters, MERV 8.
  • Two cord pass-through grommets in side panels.
  • 15’ power cord with grounded plug.
  • 3 year warranty on parts and labour.


  • 36” standing height base frame
  • ULPA filter rated 99.9995% efficient at 0.12µ
  • 230V, 50HZ power configuration
  • Stainless steel IV bar and hangers
  • Stainless steel side panels
  • Transition adaptor canopy for hard connection and thimble type applications


Sizes are nominal 3’ and 4’ widths.